Will Hanna
Member
DragRaceHose.com Injector Line Inventory Reduction Sale!!!
We have decided to move some injector lines we have in inventory, so we are slashing prices to move these lines.
Look at the last message in this post to see what we have in inventory. If you use at least 6 lines from our inventory, we will custom make the rest of your hoses to fit your length needs.
Pricing and Inventory Below!
Goodridge Injector/Port line kits
How many of you have ever had one of your rubber injector port lines either come apart and plug a nozzle, kink and lean a cylinder, or have a little flash fire from the burst panels make them need replacing? How often do you replace them to prevent the above from happening?
That's why many teams replace these rubber lines yearly, if not more often.
Goodridge Hoses & Fittings, the manufacturer of choice in many top motorsports, has a MUCH better solution. Our 600 series injector line kits far exceed than the conventional rubber injector lines. You have probably seen our carbon look lines on someone's car.
1. Teflon inner hose liner. Our 600 series hose is the same hose we use to make brake lines. The teflon inner liner significantly reduces the risk of having the inside of your hose come apart. It allows for a tighter bending radius and greatly reduces the risk of pinching/kinking. Since this line is approved for brake lines, expansion under pressure is almost non-existent.
2. Less prone to fire damage - With a durable outer cover, our 600 series hose offers far better protection for your fuel lines. In the event of fire, you definitely don't want to give the flames any help by burning through your rubber lines to more fuel. Not to mention they're junk, and one more thing to replace in the ensuing thrash.
3. They look cooler! - Carbon look outer braid. Who doesn't like carbon fiber?
4. Our lines have been flow bench tested to flow the same as conventional rubber injector lines. We now use a AN4 line with AN3 end to ensure no flow restriction.
PRICING:
PSI Dual Nozzle kit (16 intake, 4 blower)
Straight-Straights - $600
Blower line 90 upgrade (4 lines straight to 90) $700
All straights to 90 (20 lines straight to 90) $1100
PSI Single Nozzle kit (8 intake, 4 blower)
Straight-Straights - $360
Blower line 90 upgrade (4 lines straight to 90) $460
All straights to 90 (12 lines straight to 90) $660
Pro Mod Roots kit (10 hat, 8 intake)
Straight-Straights - $540
Hat line 90 upgrade (10 lines straight to 90) $790
All straights to 90 (18 lines straight to 90) $990
8 port intake kit
Straight-Straights - $240
Straight-90 - $440
Individual line pricing:
Injector line up to 55", stainless straight fittings on both ends - $30 ea
Injector line up to 41", stainless straight to 90 fitting - $55 ea (my cost on the 90 is $25)
Injector line up to 41", stainless 90 to 90 - $75 ea
Many popular sizes in stock ready to ship!
Don't stop with injector lines, Goodridge has a solution for all of your hose and fitting needs.
If you're in need of some hose, We got ya covered.
Proud distributor for Goodridge Hoses & Fittings!
Will Hanna, owner
979-415-4959
[email protected]
www.dragracehose.com
We have decided to move some injector lines we have in inventory, so we are slashing prices to move these lines.
Look at the last message in this post to see what we have in inventory. If you use at least 6 lines from our inventory, we will custom make the rest of your hoses to fit your length needs.
Pricing and Inventory Below!
Goodridge Injector/Port line kits
How many of you have ever had one of your rubber injector port lines either come apart and plug a nozzle, kink and lean a cylinder, or have a little flash fire from the burst panels make them need replacing? How often do you replace them to prevent the above from happening?
That's why many teams replace these rubber lines yearly, if not more often.
Goodridge Hoses & Fittings, the manufacturer of choice in many top motorsports, has a MUCH better solution. Our 600 series injector line kits far exceed than the conventional rubber injector lines. You have probably seen our carbon look lines on someone's car.
1. Teflon inner hose liner. Our 600 series hose is the same hose we use to make brake lines. The teflon inner liner significantly reduces the risk of having the inside of your hose come apart. It allows for a tighter bending radius and greatly reduces the risk of pinching/kinking. Since this line is approved for brake lines, expansion under pressure is almost non-existent.
2. Less prone to fire damage - With a durable outer cover, our 600 series hose offers far better protection for your fuel lines. In the event of fire, you definitely don't want to give the flames any help by burning through your rubber lines to more fuel. Not to mention they're junk, and one more thing to replace in the ensuing thrash.
3. They look cooler! - Carbon look outer braid. Who doesn't like carbon fiber?
4. Our lines have been flow bench tested to flow the same as conventional rubber injector lines. We now use a AN4 line with AN3 end to ensure no flow restriction.
PRICING:
PSI Dual Nozzle kit (16 intake, 4 blower)
Straight-Straights - $600
Blower line 90 upgrade (4 lines straight to 90) $700
All straights to 90 (20 lines straight to 90) $1100
PSI Single Nozzle kit (8 intake, 4 blower)
Straight-Straights - $360
Blower line 90 upgrade (4 lines straight to 90) $460
All straights to 90 (12 lines straight to 90) $660
Pro Mod Roots kit (10 hat, 8 intake)
Straight-Straights - $540
Hat line 90 upgrade (10 lines straight to 90) $790
All straights to 90 (18 lines straight to 90) $990
8 port intake kit
Straight-Straights - $240
Straight-90 - $440
Individual line pricing:
Injector line up to 55", stainless straight fittings on both ends - $30 ea
Injector line up to 41", stainless straight to 90 fitting - $55 ea (my cost on the 90 is $25)
Injector line up to 41", stainless 90 to 90 - $75 ea
Many popular sizes in stock ready to ship!
Don't stop with injector lines, Goodridge has a solution for all of your hose and fitting needs.
If you're in need of some hose, We got ya covered.
Proud distributor for Goodridge Hoses & Fittings!
Will Hanna, owner
979-415-4959
[email protected]
www.dragracehose.com